Nordic Lodge Wooden Wall Tiles Cladding Panelling Panels Grey White Oak Finish

Nordic Lodge Wooden Wall Tiles

Mixed Light Oak Finish, Distressed White and Washed Grey
Size: 440mm x 80mm x 10mm
Price shown is per square metre

Create a warm, rustic and inviting feature with our Jones & Grey Nordic Lodge wooden wall tiles. This carefully balanced mix combines light oak finish, distressed white and washed grey timber tiles, creating a cosy lodge-inspired look with beautiful contrast, natural texture and plenty of character.

The Nordic Lodge mix has a richer, more layered feel than a simple pale wood finish. The light oak tones bring warmth, the distressed white adds a weathered rustic softness, and the washed grey gives the design depth and contrast. Together, they create a relaxed cabin-style look that feels homely, textured and full of natural charm.

Each tile measures 440mm long x 80mm high x 10mm thick, making them ideal for feature walls, bedroom walls, garden offices, boot rooms, utility rooms, alcoves, shelving backdrops, counter fronts, reception desks and decorative interior cladding.

This design works beautifully in spaces where you want a natural timber feature that feels warm and welcoming, but still bright enough for modern interiors. It is ideal for cosy homes, country interiors, ski-lodge inspired spaces, garden cabins, family rooms, cafés, retail displays and relaxed commercial settings.

Please note: the light oak finish tiles are made from real wood and finished in a light oak-style colour. They are not made from solid oak, but are designed to give a warm natural wood appearance in a practical decorative wall tile format.

Please note: the price is per square metre. Each square metre supplied contains a mixed selection of light oak finish, distressed white and washed grey wooden wall tiles.

Where Can These Nordic Lodge Wooden Wall Tiles Be Used?

These decorative wooden wall tiles are ideal for creating a warm, textured and characterful feature in both home and commercial interiors.

Home Uses

They work beautifully in:

Bedrooms
Living rooms
Dining rooms
Hallways and entrance areas
Boot rooms
Utility rooms
Garden offices
Home offices
Kitchen breakfast nooks
Fireplace alcoves
Reading corners
Snug rooms
Family rooms
Children’s playrooms
Games rooms
Home bars
Under-stair spaces
Shelving backdrops
Cabin fronts
Built-in furniture panels
Media walls

The warm oak, white and grey combination is especially suited to lodge-style interiors, country homes, rustic modern spaces, farmhouse rooms, Scandinavian cabin schemes, garden rooms, neutral interiors and relaxed family spaces.

Commercial Uses

These tiles are also a great choice for businesses that want to create a warm, welcoming and memorable interior.

Ideal for:

Coffee shops
Cafes
Restaurants
Farm shops
Retail shops
Outdoor clothing stores
Lifestyle stores
Day care centres
Nurseries
Offices
Reception areas
Meeting rooms
Beauty salons
Treatment rooms
Wellness centres
Yoga studios
Boutique hotels
Holiday lets
Airbnb interiors
Showroom displays
Counter fronts
Reception desks
Wall displays and branded feature areas

The Nordic Lodge mix is particularly well suited to interiors where you want a natural, cosy and premium finish with more warmth and contrast than plain white or pale wood panelling.

Why Choose These Tiles?

Our Nordic Lodge wooden wall tiles are a simple way to transform a plain wall or surface into a warm, rustic and beautifully textured feature. The mix of light oak, distressed white and washed grey gives the design a natural layered look that works well with wood furniture, soft neutral fabrics, black metalwork, rattan, stone, leather, greenery and warm lighting.

They are:

Made from real wood
Supplied as a mixed light oak finish, distressed white and washed grey design
Full of natural grain, knots and texture
Ideal for feature walls, alcoves and counter fronts
A stylish alternative to wallpaper or standard wall panelling
Suitable for home and commercial interiors
Perfect for lodge-style, rustic, farmhouse, cabin and modern country spaces
Easy to arrange in a staggered brick-style layout
Designed to create a warm, handcrafted and characterful timber appearance

Because the tiles are individual pieces, they can be arranged in different layouts depending on the style of your room. Use them across a full feature wall for a cosy lodge-inspired statement, inside alcoves for added depth, behind shelving for a textured backdrop, or on counters and reception desks for a bespoke commercial finish.

Installation Guide

These tiles are intended for internal decorative use and should be fitted to a clean, dry, stable surface.

Because wood is a natural, living material that breathes and reacts to its environment, it cannot be treated like ceramic or porcelain. Under no circumstances should standard, cement-based ceramic tile adhesive be used. The wood will draw moisture from the adhesive, causing the tiles to warp, and the rigid glue will eventually crack and fail as the wood naturally expands.

For the best results, we highly recommend professional installation using one of the following methods:

Before You Begin: Mandatory Preparation

• Acclimatization: Wood must adapt to the humidity and temperature of its new environment. Leave the unboxed tiles in the room where they will be fitted for at least 48 to 72 hours before installation.
• Expansion Gaps: Always leave a 3mm to 5mm expansion gap around the perimeter of the installation (where the wood meets the floor, ceiling, and adjacent walls) to allow for natural movement.

Method 1: The Gold Standard (Wooden Substrate or Battens)

This is the preferred method of professionals, guaranteeing the most secure and long-lasting finish.

1. Create the Base: Mechanically fix a thin sheet of plywood or OSB board directly to your wall studs (or install a framework of timber battens).
2. Fix the Tiles: Apply a high-quality, flexible wood construction adhesive to the back of each tile.
3. Pin in Place: Press the tile onto the wooden sub-wall and use a brad nailer (pin gun) to fire tiny, invisible pins into the edges. This wood-to-wood bond provides ultimate structural integrity, while the pins hold the tiles perfectly tight against the wall while the adhesive cures.

Method 2: Direct to Plaster / Plasterboard

If you or your fitter choose not to board the wall first, you can apply these directly to plastered walls, but you MUST strictly adhere to the following guidelines:

1. Assess the Wall: The adhesive is only as strong as the surface it sticks to. If your wall has layers of old, peeling, or poorly bonded paint, the weight of the tiles will pull the paint right off the plaster.
2. Prepare the Surface: The wall must be perfectly flat, clean, and completely dust-free. We highly recommend sanding the paint lightly for grip and applying a primer to seal the plaster before gluing.
3. Use the Correct Adhesive: You must use a high-grab, flexible construction adhesive (specifically an MS Polymer or Polyurethane wood flooring adhesive).
4. Prevent Slippage: Because you cannot use a nail gun into plaster, you must use an adhesive with a very high "initial grab" to ensure the 10mm thick tiles do not slide down the wall while the glue is setting. Bottom-up installation, using spacers or a level ledger board, is highly recommended.

Steps:

Start from a straight, level line rather than relying on the floor or ceiling, as these may not be perfectly level.

Apply a suitable high-strength grab adhesive to the back of each tile. Use enough adhesive to provide a strong bond, but avoid applying too much near the edges where it may squeeze out.

Press each tile firmly onto the wall and hold it in place until it grips. Continue fitting the tiles in a staggered brick-style pattern or your chosen layout.

Keep checking the rows with a spirit level as you work across the wall. Small variations can become more noticeable over a larger area, so regular checking is important.

Cut tiles as needed at the ends of rows, around sockets, corners, shelves or alcoves. Lightly sand any cut edges before fitting.

For the best visual effect, avoid placing too many tiles of the same colour together. Spread the oak, grey, white, teal and brown tiles evenly across the area.

Once fitted, allow the adhesive to fully cure according to the adhesive manufacturer’s instructions before touching, cleaning or placing pressure on the tiles.

Important Installation Notes

Do not install onto damp walls.
Do not install directly next to open flames or high heat sources.
Not recommended for wet rooms, showers or external use.
If fitting near kitchens, sinks or areas where splashing may occur, ensure the tiles are protected appropriately and kept dry.
Always follow the adhesive manufacturer’s instructions.
Check for hidden cables or pipes before cutting, drilling or fixing into walls.

Professional Installation Recommended

Although these tiles can be fitted by a competent DIY user, professional installation is recommended, especially for larger feature walls, commercial spaces, alcoves, counters, areas around sockets, or walls requiring cutting and finishing. A professional installer will help ensure the tiles are securely fitted, level, evenly spaced and finished to a high standard.